Unfortunately, this product is no longer available
Similar products:
Digital three point internal micrometer 16 - 20...
Digital three point internal micrometer 16 - 20 mm IP 65
- suitable for measuring blind holes - with carbide measuring faces, setting ring 16 mm and extension L 152,4 x Ø 11,8 - Digital-Display with on/preset, mm/inch and hold...
€271.20
*
Stock: 4
Digital three point internal micrometer 16-20...
Digital three point internal micrometer 16-20 mm
- for blind hole - with carbide measuring faces - display with on/off/set, hold, mm/inch button - with data output RB 6 - reading 0,001 mm - accuracy 0,005 m m (at full contact of...
€198.60
*
Stock: 6
Three point internal micrometer 16-20 mm...
Three point internal micrometer 16-20 mm analogue
- with setting gauge 16 mm and extension 150 x Ø 11,7 mm - for blind hole - with carbide measuring faces - satin chrome finished - DIN 863 - in case/box Range 16 - 20 mm
€166.80
*
Stock: 4
Inserts 70 mm with shank for measurings inserts...
Inserts 70 mm with shank for measurings inserts with thread M2,5
- shank Ø 5 mm, insert for measuring adapter - shank suitable for all measuring inserts with thread M2,5, at the side and ground - delivery pairwise
Lenght 70 mm
€27.60
*
Stock: 17
Single gauge block 1,09 mm special steel Degree 1
Single gauge block 1,09 mm Degree 1
- made of special steel , hardened - dimension 30 x 9 mm - accuracy to DIN EN ISO 3650 - Degree 1
Size : 1,09 mm
€9.30
*
Stock: 40
"GO" Thread ring gauge M 14 x 1,5- 6g DIN 13
"GO" Thread ring gauge M 14 x 1,5- 6g
- for ISO fine metric thread, right - hardened tool steel - "GO", DIN 13, 6g - with certification according to VDI/VDE/DGQ 2618/4.8 Size: M 14 x 1,5
€35.18
*
Stock: 11
"GO" thread gauge M 78 x 2 - 6H DIN 13
"GO" thread gauge M 78 x 2 - 6H
- with certification - "GO" thread gauge - for ISO standard metric thread, right - hardened tool steel - DIN 13, 6H Size: M 78 x 2
€68.40
*
Stock: 4
Digital dial indicator 10 x 0,01 mm with round...
Digital dial indicator 0 - 10 mm with depth base
- digital dial indicator - range 10 mm, reading 0,01 mm - accuracy to manufacture standard (20 µm) - with preset and convertable meas. direction - base: Ø 16 mm - incl....
€115.20
*
Thread ring gauge "GO" M 30 x 1 - 6g DIN 13
Thread ring gauge "GO" M 30 x 1 - 6g
- for ISO fine metric thread, right - hardened tool steel - "GO" - DIN 13, 6g
Size: M 30 x 1
€35.46
*
Stock: 11
Vernier caliper 0 - 150 mm with round depth...
Vernier caliper 0 - 150 mm with round depth gauge DIN 862
- made of stainless steel - satin chrome finished, hardened - usable to 4-way measurement - backside with screw table - in case/box
Range 0 - 150 mm
€20.76
*
Stock: 178
Viewed