Unfortunately, this product is no longer available
Similar products:
Digital three point internal micrometer 40-50...
Digital three point internal micrometer 40-50 mm
- for blind hole - with carbide measuring faces - display with on/off/set, hold, mm/inch button - with data output RB 6 - reading 0,001 mm - accuracy 0,005 mm (at full contact of...
€271.80
*
Stock: 5
Three point internal micrometer 40-50 mm...
Three point internal micrometer 40-50 mm analogue
- with setting gauge 40 mm and extension 150 x Ø 23,4 mm - for blind hole - with carbide measuring faces - satin chrome finished - DIN 863 - in case/box Range 40 - 50 mm
€289.80
*
Stock: 1
Digital three point internal micrometer 40 - 50...
Digital three point internal micrometer 40 - 50 mm IP 65
- suitable for measuring blind holes - with carbide measuring faces, setting ring 40 mm and extension L 152,4 x Ø 23,5 - Digital-Display with on/preset, mm/inch and hold...
€333.00
*
Stock: 3
Inserts 70 mm with shank for measurings inserts...
Inserts 70 mm with shank for measurings inserts with thread M2,5
- shank Ø 5 mm, insert for measuring adapter - shank suitable for all measuring inserts with thread M2,5, at the side and ground - delivery pairwise
Lenght 70 mm
€27.60
*
Stock: 17
Single gauge block 1,09 mm special steel Degree 1
Single gauge block 1,09 mm Degree 1
- made of special steel , hardened - dimension 30 x 9 mm - accuracy to DIN EN ISO 3650 - Degree 1
Size : 1,09 mm
€9.30
*
Stock: 40
"GO" Thread ring gauge M 14 x 1,5- 6g DIN 13
"GO" Thread ring gauge M 14 x 1,5- 6g
- for ISO fine metric thread, right - hardened tool steel - "GO", DIN 13, 6g - with certification according to VDI/VDE/DGQ 2618/4.8 Size: M 14 x 1,5
€35.18
*
Stock: 11
"GO" thread gauge M 78 x 2 - 6H DIN 13
"GO" thread gauge M 78 x 2 - 6H
- with certification - "GO" thread gauge - for ISO standard metric thread, right - hardened tool steel - DIN 13, 6H Size: M 78 x 2
€68.40
*
Stock: 4
Digital dial indicator 10 x 0,01 mm with round...
Digital dial indicator 0 - 10 mm with depth base
- digital dial indicator - range 10 mm, reading 0,01 mm - accuracy to manufacture standard (20 µm) - with preset and convertable meas. direction - base: Ø 16 mm - incl....
€115.20
*
Thread ring gauge "GO" M 30 x 1 - 6g DIN 13
Thread ring gauge "GO" M 30 x 1 - 6g
- for ISO fine metric thread, right - hardened tool steel - "GO" - DIN 13, 6g
Size: M 30 x 1
€35.46
*
Stock: 11
Dial caliper 150 x 0,02 mm DIN 862 TOP
Dial caliper 150 x 0,02 mm dial Ø 38 mm
- made of stainless steel, hardened - usable to 4- way measurement - backside with screw table - in case/box - Reading 0,02 mm
Range 0 - 150 mm
€29.46
*
Stock: 123
Viewed